This contents does not display correctly on your browser. Please update to a new browser.

MENU

Twin cylinder primary crusher
GUZZILLA Primary Crusher D

We realized world's No.1 lightweight! Maintenance cost were substantially reduced.

The machine can cut steel rods that appear during concrete crushing, due to its special steel rod cutter equipped as a standard part. Still rod cutters use highly economic two-way type cutters. There are three types of swivels. It shows its power for primary crushing, such as building or foundation dismantling.

We realized world's No.1 lightweight! Maintenance cost were substantially reduced.

The machine can cut steel rods that appear during concrete crushing, due to its special steel rod cutter equipped as a standard part. Still rod cutters use highly economic two-way type cutters. There are three types of swivels. It shows its power for primary crushing, such as building or foundation dismantling.

Select the carriage class from the tab below

  • D-35B

    Class of excavator[ton] 3~4 Working pressure[MPa] 24.5 Maximum working pressure[MPa] 24.5 Body length A[mm] 1000 Max opening B[mm] 360 Cutter length C[mm] 100 Tip crushing force D[kN] 240 Central crushing force E[kN] 358 Mass[kg] 240

    • FFree swivel
    • SHydraulic swivel
    • AAutomatic swivel
    • Synchronous links
    • Accelerated valve
    • Double speed increasing valve
    • Twin cylinder
    • Large cylinder
    • Adapter parts
    • Two-sided use type cutter
    • Tetrahedral use type cutter
    • AT (A only )
    • Free swivel

      FType

    • Hydraulic swivel

      SType

    • Automatic swivel

      AType

    • Synchronous links
    • Accelerated valve
    • Double speed increasing valve
    • Twin cylinder
    • Large cylinder
    • Adapter parts
    • Two-sided use type cutter
    • Tetrahedral use type cutter
    • AT (A only )

Specifications

  • FType / Free swivel

    D-35BF D-42F D-62F D-71F D-122F D-131F D-212F D-352F D-412F D-452F D-482F D-492F D-1052F D-1082F D-1092F
    Class of excavator[ton] 3~4 4~5 6~8 6~8 12~14 12~14 20~22 30~37 40~45 40~45 45~55 45~55 100 100 100
    Working pressure[MPa] 24.5 24.5 24.5 24.5 29.4 31.4 31.4 31.4 31.4 31.4 31.4 31.4 31.4 31.4 31.4
    Maximum working pressure[MPa] 24.5 24.5 27.4 27.4 31.4 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3
    Body length A[mm] 1000 1240 1690 1720 1870 2070 2350 2820 3100 3190 3310 3410 3260 3380 3450
    Max opening B[mm] 360 500 630 800 900 1000 1300 1550 1800 1900 2000 2200 1900 2000 2200
    Cutter length C[mm] 100 110 130 130 130 170 210 240 240 240 240 240 240 240 240
    Tip crushing force D[kN] 240 343 431 519 532 725 1160 1380 1380 1380 2250 2060 1338 2250 2060
    Central crushing force E[kN] 358 529 676 794 834 1120 1730 2110 2110 2110 3370 3150 2110 3370 3150
    Mass[kg] 240 380 740 850 1090 1400 2350 3680 4600 5110 6070 6380 5610 6600 6880

    ※Single two-way hydraulic piping is necessary for typeF. ※The arm of the excavator should preferably be reinforced to mount a GUZZILLA series. ※It cannot be mounted to excavators in different classes. ( As of May. 2020 )

  • SType / Hydraulic swivel

    D-35BS D-42S D-62S D-71S D-122S D-131S D-212S D-352S D-412S D-452S D-482S D-492S D-1052S D-1082S D-1092S
    Class of excavator[ton] 3~4 4~5 6~8 6~8 12~14 12~14 20~22 30~37 40~45 40~45 45~55 45~55 100 100 100
    Working pressure[MPa] 24.5 24.5 24.5 24.5 29.4 31.4 31.4 31.4 31.4 31.4 31.4 31.4 31.4 31.4 31.4
    Maximum working pressure[MPa] 24.5 24.5 27.4 27.4 31.4 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3
    Body length A[mm] 1000 1240 1690 1720 1870 2070 2350 2820 3100 3190 3310 3410 3260 3380 3450
    Max opening B[mm] 360 500 630 800 900 1000 1300 1550 1800 1900 2000 2200 1900 2000 2200
    Cutter length C[mm] 100 110 130 130 130 170 210 240 240 240 240 240 240 240 240
    Tip crushing force D[kN] 240 343 431 519 532 725 1160 1380 1380 1380 2250 2060 1338 2250 2060
    Central crushing force E[kN] 358 529 676 794 834 1120 1730 2110 2110 2110 3370 3150 2110 3370 3150
    Mass[kg] 240 380 740 870 1090 1400 2370 3680 4600 5110 6070 6380 5610 6600 6880

    ※Double two-way hydraulic piping are necessary for typeS. (Drain piping is necessary for models D-61S/71S/131S/201S/211S/351S/451S/DK-481S/491S if the back pressure on the hydraulic rotation line is more than 2MPa.) ※The arm of the excavator should preferably be reinforced to mount a GUZZILLA series. ※It cannot be mounted to excavators in different classes. ( As of May. 2020 )

  • AType / Automatic swivel

    D-35BA D-42A D-62A D-71A D-122A D-131A D-212A D-352A D-412A D-452A D-482A D-492A D-1052A D-1082A D-1092A
    Class of excavator[ton] 3~4 4~5 6~8 6~8 12~14 12~14 20~22 30~37 40~45 40~45 45~55 45~55 100 100 100
    Working pressure[MPa] 24.5 24.5 24.5 24.5 29.4 31.4 31.4 31.4 31.4 31.4 31.4 31.4 31.4 31.4 31.4
    Maximum working pressure[MPa] 24.5 24.5 27.4 27.4 31.4 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3
    Body length A[mm] 1000 1240 1690 1720 1870 2070 2350 2820 3100 3190 3310 3410 3260 3380 3450
    Max opening B[mm] 360 500 630 800 900 1000 1300 1550 1800 1900 2000 2200 1900 2000 2200
    Cutter length C[mm] 100 110 130 130 130 170 210 240 240 240 240 240 240 240 240
    Tip crushing force D[kN] 240 343 431 519 532 725 1160 1380 1380 1380 2250 2060 1338 2250 2060
    Central crushing force E[kN] 358 529 676 794 834 1120 1730 2110 2110 2110 3370 3150 2110 3370 3150
    Mass[kg] 240 380 740 880 1090 1400 2370 3680 4600 5110 6070 6380 5610 6600 6880

    ※Single two-way hydraulic piping is necessary for typeA.※Use it above the minimum working pressure.If it is lower than the minimum working pressure,swiveling may be impossible. ※The arm of the excavator should preferably be reinforced to mount a GUZZILLA series. ※It cannot be mounted to excavators in different classes. ( As of May. 2020 )

Product catalogue

close

among...(items)displaying items

Your search gave no result.