This contents does not display correctly on your browser. Please update to a new browser.

MENU

Powerful primary concrete crushing & steel-rod cutting machine
GUZZILLA FC Cutter

GUZZILLA cutters were equipped with primary crushing teeth.

It shows its power at dismantling of reinforced-steel-rod and steel-frame constructions, for the demolition of reinforced concrete buildings. There are three types of swivels.

GUZZILLA cutters were equipped with primary crushing teeth.

It shows its power at dismantling of reinforced-steel-rod and steel-frame constructions, for the demolition of reinforced concrete buildings. There are three types of swivels.

Select the carriage class from the tab below

  • MFP-200

    Class of excavator[ton] 20~22 Working pressure[MPa] 31.4 Maximum working pressure[MPa] 34.3 Body length A[mm] 2440 Max opening B[mm] 800 Cutter length C[mm] 500 Tip crushing force D[kN] 711 Cutter center cutting force E[kN] 1640 Mass[kg] [F]2300 [S]2320 [A]2320

    • FFree swivel
    • SHydraulic swivel
    • AAutomatic swivel
    • Synchronous links
    • Accelerated valve
    • Double speed increasing valve
    • Twin cylinder
    • Large cylinder
    • Adapter parts
    • Two-sided use type cutter
    • Tetrahedral use type cutter
    • AT (A only )
    • Free swivel

      FType

    • Hydraulic swivel

      SType

    • Automatic swivel

      AType

    • Synchronous links
    • Accelerated valve
    • Double speed increasing valve
    • Twin cylinder
    • Large cylinder
    • Adapter parts
    • Two-sided use type cutter
    • Tetrahedral use type cutter
    • AT (A only )

Specifications

  • FType / Free swivel

    MFP-200F
    Class of excavator[ton] 20~22
    Working pressure[MPa] 31.4
    Maximum working pressure[MPa] 34.3
    Body length A[mm] 2440
    Max opening B[mm] 800
    Cutter length C[mm] 500
    Tip crushing force D[kN] 711
    Cutter center cutting force E[kN] 1640
    Mass[kg] 2300

    ※Single two-way hydraulic piping is necessary for typeF. ※The arm of the excavator should preferably be reinforced to mount a GUZZILLA series. ※It cannot be mounted to excavators in different classes. ( As of Jan. 2017 )

  • SType / Hydraulic swivel

    MFP-200S
    Class of excavator[ton] 20~22
    Working pressure[MPa] 31.4
    Maximum working pressure[MPa] 34.3
    Body length A[mm] 2440
    Max opening B[mm] 800
    Cutter length C[mm] 500
    Tip crushing force D[kN] 711
    Cutter center cutting force E[kN] 1640
    Mass[kg] 2320

    ※Double two-way hydraulic piping are necessary for typeS. (Drain piping is necessary if the back pressure on the hydraulic rotation line is more than 2MPa.) ※The arm of the excavator should preferably be reinforced to mount a GUZZILLA series. ※It cannot be mounted to excavators in different classes. ( As of Jan. 2017 )

  • AType / Automatic swivel

    MFP-200A
    Class of excavator[ton] 20~22
    Working pressure[MPa] 31.4
    Maximum working pressure[MPa] 34.3
    Body length A[mm] 2440
    Max opening B[mm] 800
    Cutter length C[mm] 500
    Tip crushing force D[kN] 711
    Cutter center cutting force E[kN] 1640
    Mass[kg] 2320

    ※Single two-way hydraulic piping is necessary for typeA.※Use it above the minimum working pressure.If it is lower than the minimum working pressure,swiveling may be impossible.※The arm of the excavator should preferably be reinforced to mount a GUZZILLA series. ※It cannot be mounted to excavators in different classes. ( As of Jan. 2017 )

Product catalogue

close

among...(items)displaying items

Your search gave no result.