This contents does not display correctly on your browser. Please update to a new browser.

MENU

Hydraulic Power Generation Magnet
MAG GON

Best for collection, loading and unloading of steel frames.

It can do great jobs in loading and unloading work on scrap sites and collecting of scrap and rebars on demolition sites. No electrical wire routing is necessary, only ducts for breakers. Easy manipulation of the hydraulic shovel for grip and release can be done by foot pedal.

Best for collection, loading and unloading of steel frames.

It can do great jobs in loading and unloading work on scrap sites and collecting of scrap and rebars on demolition sites. No electrical wire routing is necessary, only ducts for breakers. Easy manipulation of the hydraulic shovel for grip and release can be done by foot pedal.

Select the carriage class from the tab below

  • GM-40

    Class of excavator[ton] 4~5 Use Hydraulic[MPa] 14.7 Required Flow Rate[L/min] 19 or more than 19 Full Height A[mm] 630 Dimension B[mm] 695 Dimension C[mm] 360 Duty Cycle[%ED] 60 Power Consumption[kW] 1.0 Magnet Diameter D[mm] φ500 mass(Including hydraulic oil )[kg] 380 Max. Lifting Mass[kg] Pig Iron/120kg
    Steel Cut Wastes/90...

    • magnet
    • Adapter parts
    • magnet
    • Adapter parts

Specifications

  • GM-40 GM-60 GM-120 GM-200
    Class of excavator[ton] 4~5 6~8 12~14 20~22
    Use Hydraulic[MPa] 14.7 17.6 20.6 20.6
    Required Flow Rate[L/min] 19 or more than 19 19 or more than 19 27 or more than 27 54 or more than 54
    Full Height A[mm] 630 775 780 930
    Dimension B[mm] 695 900 1110 1370
    Dimension C[mm] 360 500 620 750
    Duty Cycle[%ED] 60 60 60 60
    Power Consumption[kW] 1.0 3.3 6.2 9.3
    Magnet Diameter D[mm] φ500 φ700 φ900 φ1100
    mass(Including hydraulic oil )[kg] 380 680 1080 1800
    Max. Lifting Mass[kg] Pig Iron/120kg
    Steel Cut Wastes/90kg
    Chips/25kg
    Pig Iron/350kg
    Steel Cut Wastes/200kg
    Chips/100kg
    Pig Iron/500kg
    Steel Cut Wastes/300kg
    Chips/200kg
    Pig Iron/900kg
    Steel Cut Wastes/500kg
    Chips/300kg

    ※In order to assemble(to MAG-GON)an excavator,it is to be equipped either with the hydraulic breaker piping or with the hydraulic crusher piping.(Plovided that the back pressure of this excavator should not exceed more than 4.9MPa.) ※The available excavator for MAG-GON is limited to the above mentioned excavator class and not allowed to be equipped to any other class. ※There are some excavator models of which model can’t be applied for MAG-GON.In this case please contact our next located distributors. ※Carefully read the manual of MAG-GON through before starting to use it. ( As of May. 2020 )

Product catalogue

close

among...(items)displaying items

Your search gave no result.